10.3 Accidental Structural Fires
Category 750
10.3.1 Introduction
Category 750 accounts for criteria pollutants (particulate matter, organic, NOx, SOx, and CO) emissions from accidental structural fires. It’s an area source category that includes residential and commercial buildings fires as well as mobile and trailer home fires. Starting from the current base year inventory, the category was treated as “CARB Source Categories” and the process was described below.
10.3.2 Methodology
For certain categories in the base year inventory, emissions data are derived by inventory staff of the state’s chief air quality regulatory agency, the California Air Resources Board (CARB). This significant emissions dataset, sorted by county, is published every few years and is a product of the State Implementation Plan (SIP) emissions document formally known as the California Emissions Projection Analysis Model (CEPAM) inventory. For related sets of categories, such as airport ground support equipment (GSE), ships, structures coatings, where independent data collection and derivation of emissions are both cost- and time-prohibitive and likely a redundant effort, BAAQMD staff export the emissions data directly from CEPAM into the District’s Base Year inventory package. This calculation approach and collection of categories are internally termed as “CARB Source Categories”.
The CEPAM provides historical emissions as well as forecasts emissions for major emission source classifications including –
- on-road mobile sources [from Emissions Factor (EMFAC) model],
- off-road mobile sources (OFFROAD model), and,
- stationary and area sources - For these major source classifications, CEPAM combines facility level /area source emissions data reported to the California Emissions Inventory Development and Reporting System (CEIDARS) for multiple years by various regional air quality agencies (including the BAAQMD).
The current base year inventory uses the 2016 CEPAMv1.05 to estimate emissions from “CARB Source Categories”. This version of the CEPAM derives emissions from a 2012 base year inventory and contains backcasts and forecasts from year-2000 to year-2035. All applicable regulatory and technological controls are assumed to be built into the CEPAM dataset during CARB staff’s inventory computation work. After the emissions data are exported, the inventory for CARB Source categories is taken through a quality assurance (QA) process.
In the QA process, BAAQMD staff perform a systematic crosswalk between CEPAM’s source category classification (Emission Inventory Code - EICs) and the District’s source category classification (category identification number - cat_ids). Based on the scope of emissions covered, individual EIC or a group of EICs are mapped to a single cat_id. This process also addresses issues when cat_ids have no matching EICs or there are discontinued EICs that need to be investigated. Following this, emissions data are backcasted to year-1990, as well as forecasted to year-2040 using certain mathematical methods, as described in the Trends section. Finally, the emissions trends spanning from year 1990-2040 for each category and pollutant are evaluated, and CARB staff are consulted for explanation of any observed anomalies in trends.
For more details on how CARB estimated emissions for accidental structural fires, please refer to CARB’s CEPAM Inventory documentation. 442
10.3.3 Changes in Methodology
Comparing to previous base year inventory, the category was processed as a “CARB Source Categories” under the current base year inventory, where county and year specific emissions were ported over from CARB CEPAM inventory directly instead of processed as a area source where emissions were estimated following CARB methodology by the District staff.
10.3.4 Emissions
The accidental structure fires is a small source category for all pollutants. A summary of emissions by category, county, and year are available via the associated data dashboard for this inventory publication.
10.3.5 Trends
The emissions data from CARB CEPAM inventory only covers year 2000 to 2035. Different approaches were applied to estimate emissions for years 1990 to 1999 and 2036 to 2040 as described below. Please refer to CARB’s CEPAM Inventory Documentation 1 for more information.
(a) Historical Emissions / History
Three different methods are used for backcasting to project historical emissions prior to year-2000 going back to year-1990, which is the starting year of the current base year inventory (referred to as BY2015). Following preliminary evaluation of the data available for initial years (post-year 2000) in the CEPAM inventory, BAAQMD staff recommends a backcasting approach. The default backcasting approach is defined by a formula here –
\[ \begin{eqnarray} \text{BY2015 emissions for year X for county Y} = \text{BY2011 total emissions for year X} \\ \\ \times \dfrac{\text{BY2015 year-2000 emissions}}{\text{ BY2011 year-2000 emissions}} \\ \\ \times \dfrac{\text{county Y fraction}}{\text{ fractional total}} \end{eqnarray} \]
This calculation is referred to as the BY2011 scaling method (based on the previous base year inventory). The second calculation approach is to derive the linear regression best fit of the year 2000-2008 CARB Sources emissions data for a category, species, and county, and extrapolate that data back in time. If this backcasting results in negative emissions prior to a certain year, the lowest positive emission value is held constant from that particular year back to year-1990. The third possible calculation approach is to use a specific growth profile for the category, provided by the in-house staff expert. These custom growth profiles are often derived from surrogate data provided by another agency or resource, or available activity data that is assumed to scale with the emissions for that specific CARB Source category.
For accidental structural fires, the BY2011 scaling method is used to derive emissions for years 1990 through 1999.
(b) Future Projections / Growth
Emissions forecasting was done by holding the year-2035 emissions data constant through and up to year-2040. The emissions trend over year suppose to be volatile as accidental structure fire events are hard to predict. However, the emission trend in the dashboard shows a clear pattern with a relatively smooth line. This is because CARB applied a growth profile based on the occupied housing units to the base year 2012 emissions to project emissions for 2013 to 2035443.
10.3.6 Uncertainties
There are unknown magnitude of uncertainties for the category. The methodology was developed back in 1999. Both the methodology itself and underlying data have not been evaluated or updated ever since. The District recommends to collect historical statistics of accidental structure fires in Bay Area from Department of Forestry and Fire Protection (CAL FIRE) to estimate historical emissions. The District also recommends to acquire historical housing unit statistics from Metropolitan Transportation Commission (MTC) so the correlation between the two could be assessed to help determine if it’s still reasonable to apply the housing unit-based growth profile.
10.3.7 Contact
Author: Yuan Du
Reviewer: Abhinav Guha, Tan Dinh
Last Update: November 06, 2023
10.3.8 References & Footnotes
CARB. Criteria Pollutant Emission Inventory Information (CEPAM) . [accessed 2023 Mar 13]. https://ww2.arb.ca.gov/criteria-pollutant-emission-inventory-data↩︎
CARB. November 2003. CEPAM Inventory Documentation Summary Section 7.14 Structural and Automobile Fires. https://ww3.arb.ca.gov/ei/areasrc/onehtm/one7-14.htm↩︎